RCS3750G-24TS-S Rugged 1U Managed Switch

  • Designed to MIL-STD 810F and MIL-S-901D
  • 24 Ports Auto-negotiate at 10/100/1000BASE-T
  • Four SFP-based Gigabit Ports
  • 18" depth

The RCS3750G-24TS-S offers extended capability with shock/vibe rating of 3 GRMS in combined wheeled vehicle and aircraft profiles, a temperature range of –15oC up to 55oC (5 to137oF) and multiple power options. The RCS3750G-24TS-S is available with basic routing protocols: RIPv1, RIPv2, RIPng, and Static along with advanced routing protocols: OSPF, IGRP, EIGRP, IS-ISv4, BGPv4.

The RCS3750G-24TS-S supports IPv6 routing, utilizes Cisco® compatible switch stacking interconnect technology -- allowing up to nine (9) switches to be integrated into a single logical unit addressable with a single IP address, and offers plug and play functionality. Management is performed by Cisco®compatible software.

Crystal products are designed and being tested to meet MIL-STDs 810F, 167-1, 461E, and 901D requirements. As always, each Crystal product comes with a standard three-year warranty. On-site, next day and extended warranties are available. Configuration Management is also available upon request.

 

** If you are logged in please click on the Documents tab to view our documentation for this product.

RCS3750G-24TS-S, Rugged 1U Managed Switch - 24 Port 10/100/1000 BASE-T, 4 SFP ports

Key Rugged Switch Features

Rugged 1U in a 19” rack or transit case EIA form factor
Light weight: 16 lbs (7.3 Kg)
Short depth: 14.7” (37.4. cm)
Extended temperature range: -15C to +55C
Basic RIP and Static Routing 
Supports IPv6 
Layer 2 - 4 switching and dynamic IP routing
24 Ports Auto-negotiate at 10/100/1000BASE-T
Four SFP-based Gigabit Ports
Utilizes Cisco® compatible switch stacking interconnect technology allowing up to nine (9) switches to be integrated into a single logical unit addressable with a single IP address
Plug and play functionality
Management is performed by Cisco® compatible software
Maximum power consumption: 100 W
Maxium power dissipation: 314 BTUs per hour


Rugged  Switch Series Structural Features


All aluminum construction

  • 6061T-651 strain hardened structural aircraft aluminum
  • 0.187 to 0.375” thk. cross-sections
  • M&
Testing Standards *register to download for certification reports

Operational Temperature, MIL-STD-810F, Method 501.5, Procedure I/II

-15°C to +55°C

Storage, MIL-STD-810F, Method 501.5, Procedure I/II

-55°C to 85°C

Humidity, MIL-STD-810F, Method 507.4

48 Hour, 95% RH 40-65C— w/humidity kit

Altitude, MIL-STD-810F, Method 500.4

12,500ft operation, 40,000ft transport

Vibration, MIL-STD-810F, Method 514.5, Procedure I

3GRMS, 5-500Hz, 75 min/axis— w/vibe kit

MIL-S-901D, Grade A, Class 2, Type B

 

Mechanical (1U) 
Height 1.75” (4.45 cm)
Width 17.75” (45.1 cm)
Depth 14.7” (37.4. cm) faceplate to rear

Weight

16 lbs (7.3 kg)

Switch Technology

Cisco® 3750G-24TS-S  24 Port

The CatalystTM 3750 family of switches are stackable Ethernet switches to which you can connect devices like IP Phones, Wireless Access Points workstations, and other network devices such as servers, routers, and other switches. You can set the 10/100/1000 ports to operate in 10 Mbps, 100 Mbps, or 1000 Mbps in full duplex. You can also set these ports for speed and duplex auto-negotiation in compliance with IEEE 802.3ab. (The default setting is auto-negotiate.) When set for auto-negotiation, the port senses the speed and duplex settings of the attached device and advertises its own capabilities. If the connected device also supports auto-negotiation, the switch port negotiates the best connection (that is, the fastest line speed that both devices support and full-duplex transmission if the attached device supports it) and configures itself accordingly.

Small Form-factor Pluggable (SFP) Modules
Option 1  Cisco 1000Base-LX/LH SFP
Option 2  Cisco 1000Base-SX SFP

Option 3

Cisco 1000Base-ZX SFP

Management Layers

Standard Multilayer Image (SMI) Layer 2+ ACLs, QoS, Static Routing, RIP

Cooling 

High Speed, High Volume Fans (5) CPU temperature controlled

Mounting
Option 1 (std) Mounted on Delrin glides

Option 2

Fixed Mount, front and rear

Power Supply

Option 1 (std)

120/240VAC
Option 2 24VDC and 120/240VAC

* Crystal Group designs all switches to meet or exceed the specifications listed herein. Due to the sheer number of models and combinations of components, it is not practical to test every combination of switches offered. Please ask your Crystal Business Development Manager for data on qualification testing for configurations similar to the desired configuration for your application

   

Supporting Documentation Download
RCS3750G-24TS-S - Spec Sheet download
More Documentation Download
RCS3750G-24TS-S Rugged 1U Managed Switch - Outline Installation Drawing download